Modecom MC-4220 User Manual

1MODECOMuser’s manualMC-4220802.11n WLAN ADSL2+ Router

www.modecom.eu10802.11n WLAN ADSL2+ RouterConguring Ethernet PCs This chapter assumes that you have already established a DSL service with your Inter

www.modecom.eu100802.11n WLAN ADSL2+ RouterSSDP Discovery Service is enabled on a default installation of Windows XP. To check if it is enabled on you

101802.11n WLAN ADSL2+ Router• “Internet Gateway Device discovery and Control Client”.• “UPnP User Interface”.6. Reboot your system.Once you have inst

www.modecom.eu102802.11n WLAN ADSL2+ Router−Your network connects via the ADSL line to a remote network, such as a corpo-rate network. In order for y

103802.11n WLAN ADSL2+ RouterDelete Selected Entry Delete a selected RIP entry. The RIP entry can be selected on the Select column of the RIPCongTa

www.modecom.eu104802.11n WLAN ADSL2+ RouterFieldsontherstsettingblockDescriptionAgeing Time Set the Ethernet address ageing time, in seconds. Af

105802.11n WLAN ADSL2+ RouterFieldsontherstsettingblockDescriptionEnable Check to enable the selected route or route to be added.Destination The

www.modecom.eu106802.11n WLAN ADSL2+ Router10.0.0.0SNMPSimple Network Management Protocol (SNMP) is a troubleshooting and manage-ment protocol that us

107802.11n WLAN ADSL2+ RouterFieldsontherstsettingblockDescriptionSystem Description System description of the DSL device.System Contact Contact

www.modecom.eu108802.11n WLAN ADSL2+ RouterFieldsontherstsetting blockDescriptionEnabled/Disabled Radio buttons to enable/disable the interface g

109802.11n WLAN ADSL2+ RouterIP QoSThe DSL device provides a control mechanism that can provide different priority to different users or data ows. Th

11802.11n WLAN ADSL2+ RouterStep 1. Connect the Telephone cable to ADSL lineConnect one end of the provided phone cable to the port labeled LINE on th

www.modecom.eu110802.11n WLAN ADSL2+ RouterProtocol The selections are TCP, UDP, ICMP and the blank for none. This eld is required if the source port

111802.11n WLAN ADSL2+ RouterFields DescriptionLAN Check/un-check the services on the LAN column to allow/un-allow the services access from LAN side;

www.modecom.eu112802.11n WLAN ADSL2+ RouterFrom the left-hand • Diagnostic menu, click on Ping. The following page is dis-played:Fields DescriptionH

113802.11n WLAN ADSL2+ RouterATM LoopbackIn order to isolate the ATM interface problems, you can use ATM OAM loopback cells to verify connectivity bet

www.modecom.eu114802.11n WLAN ADSL2+ RouterADSLThis page shows the ADSL diagnostic result. Click Start button to start the ADSL diagnostic.From the

115802.11n WLAN ADSL2+ RouterDiagnostic TestThe Diagnostic Test page shows the test results for the connectivity of the physical layer and protocol la

www.modecom.eu116802.11n WLAN ADSL2+ RouterCommit/RebootWhenever you use the web console to change system settings, the changes are initially placed i

117802.11n WLAN ADSL2+ RouterBackup/RestoreYou can save the current conguration of your Router to a le on your computer. This is highly recommend

www.modecom.eu118802.11n WLAN ADSL2+ RouterRestore settingsFrom the left-hand • Adminmenu, click on Backup &Restore. The following page i

119802.11n WLAN ADSL2+ Routerto the original factory conguration, you can do so by resetting the device to factory defaults. Note If you reset your d

www.modecom.eu12802.11n WLAN ADSL2+ RouterEasy setup conguration completed. Now you are ready to Surf the Internet!!!

www.modecom.eu120802.11n WLAN ADSL2+ RouterPasswordYou can restrict access to your device’s web pages using password protection. With password

121802.11n WLAN ADSL2+ RouterAdministration Password• Click • OK.Enter new • Username andPassword.Click • Apply.10.0.0.2Loginpage

www.modecom.eu122802.11n WLAN ADSL2+ RouterFirmware UpdateThe FirmwareUpdate page allows you to:manually download the latest rmware version fr

123802.11n WLAN ADSL2+ RouterManual Update Installation section(Note that if you are using certain browsers (such as Opera7) the Browse button is lab

www.modecom.eu124802.11n WLAN ADSL2+ Router10.0.0.2MODECOM MC-4220 ADSL RouterClick on • OK.

125802.11n WLAN ADSL2+ RouterPlease wait for 1 minute to let the system reboot.• ACL CongurationThis page is used to congure the IP Address for Acce

www.modecom.eu126802.11n WLAN ADSL2+ RouterCheck on Enable.From the Interface drop-down list, select • LAN.Enter the • IPAddress and the SubnetMas

127802.11n WLAN ADSL2+ RouterFrom the left-hand Admin menu, click on Commit/Reboot. The following page is displayed:Click on • CommitandReboot.Clic

www.modecom.eu128802.11n WLAN ADSL2+ RouterFields DescriptionCurrent Time The current time of the specied time zone. You can set the current time by

129802.11n WLAN ADSL2+ RouterSNTP Server Conguration page• Congure SNTP setting successfully! Click • OK.From the left-hand • Adminmenu, click on

13802.11n WLAN ADSL2+ Router1483 Bridged IP LLCAfter selecting the Protocol : 1483 Bridged IP LLC:• Enter • VPI/VCI which was given by Telecom or by

www.modecom.eu130802.11n WLAN ADSL2+ RouterAST-400Atlantic StandardFirst Sunday of April at 2:00amLast Sunday of Octo-ber at 2:00amNFST-330Newfoundlan

131802.11n WLAN ADSL2+ RouterBT+300Baghdad1st April at 2:00am1st October at 2:00amIT+330Iran21st March23rd SeptemberUSZ3+400Russian VolgaLast Sunday M

www.modecom.eu132802.11n WLAN ADSL2+ RouterTR-069 CongTR-069 is a protocol for communication between a CPE and Auto-Conguration Server (ACS). The CP

133802.11n WLAN ADSL2+ RouterACS Field DescriptionURL ACS URL. For example, http://10.0.0.1:80 https://10.0.0.1:443User Name The username the DSL devi

www.modecom.eu134802.11n WLAN ADSL2+ Router,ADSLThis page shows the ADSL line statistic information.From the left-hand • Statistics menu, click on AD

135802.11n WLAN ADSL2+ RouterConguring your ComputersThis appendix provides instructions for conguring the Internet settings on your computers to

www.modecom.eu136802.11n WLAN ADSL2+ RouterIn the • Network and Dial-up Connections window, right-click the Local Area Connection icon, and t

137802.11n WLAN ADSL2+ Routerother media. Follow the instructions to install the les.If prompted, click • OK to restart your computer with the new s

www.modecom.eu138802.11n WLAN ADSL2+ RouterClick • OK twice to conrm and save your changes.You will be prompted to restart Windows. • Click • Yes.W

139802.11n WLAN ADSL2+ RouterBefore you begin, you must have the following information available:The IP address and subnet mask of each PC • The IP ad

www.modecom.eu14802.11n WLAN ADSL2+ Router1483 MER LLC Fixed IPAfter selecting the Protocol : 1483 MER LLC:• Enter • VPI/VCI which was given by Telec

www.modecom.eu140802.11n WLAN ADSL2+ RouterSimilarly, IP addresses contain two kinds of information:NetworkID• Identies a particular network withi

141802.11n WLAN ADSL2+ RouterSubnet masks DenitionmaskA mask looks like a regular IP address, but contains a pattern of bits that tells what parts of

www.modecom.eu142802.11n WLAN ADSL2+ RouterTroubleshooting SuggestionsProblemTroubleshooting SuggestionLEDsPowerLEDdoesnotilluminateafterproduct

143802.11n WLAN ADSL2+ RouterProblemTroubleshooting SuggestionIforgot/lostmyuserIDorpassword.If you have not changed the password from the defau

www.modecom.eu144802.11n WLAN ADSL2+ RouterUsing the ping UtilityIf the target computer cannot be located, you will receive the message Requesttimed

145802.11n WLAN ADSL2+ RouterUsing the nslookup UtilityThere may be several addresses associated with an Internet name. This is com-mon for web sites

www.modecom.eu146802.11n WLAN ADSL2+ Routerauthenticate To verify a user’s identity, such as by prompting for a pass-word.binary The “base two” system

147802.11n WLAN ADSL2+ RouterDHCP server Dynamic Host Conguration Protocol server A DHCP server is a computer that is responsible for assigning IP ad

www.modecom.eu148802.11n WLAN ADSL2+ RouterFTP File Transfer Protocol A program used to transfer les between computers con-nected to the Internet. Co

149802.11n WLAN ADSL2+ RouterIP address Internet Protocol address The address of a host (computer) on the Internet, consisting of four numbers, each f

15802.11n WLAN ADSL2+ Router1483 MER LLC DHCPAfter selecting the Protocol : 1483 MER LLC:• Enter • VPI/VCI which was given by Telecom or by your Inte

www.modecom.eu150802.11n WLAN ADSL2+ Routernetwork A group of computers that are connected together, allowing them to communicate with each other and

151802.11n WLAN ADSL2+ RouterPPPoE Point-to-Point Protocol over Ethernet One of the two types of PPP interfaces you can dene for a Virtual Circuit (V

www.modecom.eu152802.11n WLAN ADSL2+ RouterTCP SeeTCP/IP.TCP/IP Transmission Control Protocol/Internet Protocol The basic protocols used on the Inter

153802.11n WLAN ADSL2+ Routertwisted pair The ordinary copper telephone wiring used by telephone companies. It contains one or more wire pairs twisted

www.modecom.eu154802.11n WLAN ADSL2+ RouterWeb browser A software program that uses Hyper-Text Transfer Protocol (HTTP) to download information from (

155802.11n WLAN ADSL2+ Router

www.modecom.euMODECOM S.A.00-124 Warszawa, Rondo ONZ 1.www.modecom.euCopyright© 2010. MODECOM S.A. All rights reserved. MODECOM Logo is a registered t

www.modecom.eu16802.11n WLAN ADSL2+ RouterGetting Started with the Web pagesThe Wireless ADSL2+ Router includes a series of Web pages that p

17802.11n WLAN ADSL2+ RouterThe rst time that you click on an entry from the left-hand menu, a login box is displayed. You must enter your username

www.modecom.eu18802.11n WLAN ADSL2+ RouterTesting your SetupOnce you have connected your hardware and congured your PCs, any computer on your LAN sho

19802.11n WLAN ADSL2+ Router WARNINGWe strongly recommend that you contact your ISP prior to changing the default conguration.Option Defaul

www.modecom.eu2802.11n WLAN ADSL2+ RouterContestIntroduction 5Device Requirements 5Using this Document 6Special messages 6Getting to know the devi

www.modecom.eu20802.11n WLAN ADSL2+ Router10.0.0.2 OverviewpageThe information displayed on this page is explained in detail in the following sec-tio

21802.11n WLAN ADSL2+ RouterIP address and sub-net mask:The IP address and subnet mask assigned to your WAN interface. This address is used temporaril

www.modecom.eu22802.11n WLAN ADSL2+ RouterWirelessNetworkpageField DescriptionDisable Wireless LAN InterfaceEnable/Disable the Wireless LAN Interfac

23802.11n WLAN ADSL2+ RouterFunction Button DescriptionAssociated ClientsShow Active Wireless Client TableThis table shows the MAC address, transmissi

www.modecom.eu24802.11n WLAN ADSL2+ RouterField DescriptionAuthen-tication TypeOpen System: Open System authentication is not required to be successfu

25802.11n WLAN ADSL2+ RouterSecurityThis page allows you setup the wireless security. Turn on WEP or WPA by using Encryption Keys could prevent any un

www.modecom.eu26802.11n WLAN ADSL2+ RouterSet WEP Key Congure the WEP KeyUse 802.1x Au-thenticationCheck it to enable 802.1x authentication. This opt

27802.11n WLAN ADSL2+ RouterClick • SetWEPKey button.Enter your user name and password. The rst time you log into the program, • use these default

www.modecom.eu28802.11n WLAN ADSL2+ RouterChange setting successfully! Click on OK button to conrm and return.WEP + Use 802.1x AuthenticationWEP aims

29802.11n WLAN ADSL2+ Router2. Click on the ratio of Personal(Pre-SharedKey). 3. From the Pre-SharedKeyFormat drop-down list, select Passphrase or

3802.11n WLAN ADSL2+ RouterDHCP Settings 63DHCP Server Conguration 63DHCP Relay Conguration 65DHCP None Conguration 67DNS Conguration 69DHCP

www.modecom.eu30802.11n WLAN ADSL2+ RouterFrom the Encryption drop-down list, select WPA,WPA2 or WPA2Mixedsetting.Click on the ratio of Enterprise

31802.11n WLAN ADSL2+ RouterAllow Listed1. If you choose ‘Allowed Listed’, only those clients whose wireless MAC address-es are in the access control

www.modecom.eu32802.11n WLAN ADSL2+ Router6. The MAC Address that you created has been added in the Current AccessControlList.Deny List

33802.11n WLAN ADSL2+ RouterWPSIntroduction of WPSAlthough home Wi-Fi networks have become more and more popular, users still have trouble with the in

www.modecom.eu34802.11n WLAN ADSL2+ RouterIf those unsupported modes are enforced by users, WPS will be disabled. Under the conguration of every WP

35802.11n WLAN ADSL2+ RouterInstructions of AP’s and Client’s operationsAt this state, AP is transparent to users. If users want to congure a station

www.modecom.eu36802.11n WLAN ADSL2+ RouterPush Button Conguration“Self-PIN Number” is AP’s PIN. Whenever users want to change AP’s PIN, they could cl

37802.11n WLAN ADSL2+ Router3. Plug the Ethernet cable into AP’s LAN port and make sure the IP connection is valid with Vista.4. Make sure WCN is enab

www.modecom.eu38802.11n WLAN ADSL2+ Router7. Click on “Turn on network discovery and le sharing“

39802.11n WLAN ADSL2+ Router8. Click on “No, make the network that I am connected to a private network“9. AP’s icon will show up. Double click on it.1

www.modecom.eu4802.11n WLAN ADSL2+ RouterRemote Access 110Others 111Diagnostic 111Ping 111ATM Loopback 113ADSL 114Diagnostic Test 115Commit/Reb

www.modecom.eu40802.11n WLAN ADSL2+ Router11. Enter AP’s Self-PIN Number and click “next”.12. Choose a name that people who connect to your network wi

41802.11n WLAN ADSL2+ Router13. Enter the Passphrase and then click Next.14. A User Account Control screen pops up, click Continue.15. AP is successfu

www.modecom.eu42802.11n WLAN ADSL2+ Router16. Finally, AP will become congured (see WPS Status). The authentication al-gorithm, encryption algorith

43802.11n WLAN ADSL2+ RouterOperations of AP - AP being a registrarAP mode Whenever users enter station’s PIN into AP’s Wi-Fi Protected Setup page and

www.modecom.eu44802.11n WLAN ADSL2+ Router7. If the device PIN is correct and the WPS handshake is successfully done on the station side, User’s Wi-Fi

45802.11n WLAN ADSL2+ Router8. If the device PIN is correct and the WPS handshake is successfully done, AP’s Wi-Fi Protected Setup page will be shown

www.modecom.eu46802.11n WLAN ADSL2+ Router4. Users must start the PBC method on the station side within two minutes.5. Users must start the PBC method

47802.11n WLAN ADSL2+ Router6. If the device PCB and the WPS handshake is successfully done on the station side, User’s Wi-Fi Protected status will be

www.modecom.eu48802.11n WLAN ADSL2+ RouterOther pages such as WirelessBasicSettingspage and WirelessSecuritySetuppage will also be updated a

49802.11n WLAN ADSL2+ RouterBroadband User-name and Pass-wordTo congure Broadband Username and Password, enter the user name and password details. Al

5802.11n WLAN ADSL2+ RouterIntroductionCongratulations on becoming the owner of the Wireless ADSL2+ Router. You will now be able to access the Interne

www.modecom.eu50802.11n WLAN ADSL2+ RouterYour ISP may also tell you to set unique path and circuit numbers (called VPI and VCI) in order to connect y

51802.11n WLAN ADSL2+ Router7. Your conguration is complete.8. Now you are ready to Surf the Internet !!!Conguring your PPPoA DSL connectionIf your

www.modecom.eu52802.11n WLAN ADSL2+ RouterYour conguration is complete.• Now you are ready to Surf the Internet !!!• Conguring your Bridged DSL conn

53802.11n WLAN ADSL2+ RouterNow you can load your PPPoE Client Software onto your PC.• Now you can load your PPPoE Client Software with • username a

www.modecom.eu54802.11n WLAN ADSL2+ RouterConguring your 1483 MER by Fixed IPFrom the left-hand • WANmenu, click on ChannelCong. The following pa

55802.11n WLAN ADSL2+ RouterATM SettingsThe page is for ATM PVC QoS parameters setting. The DSL device support 4 • QoS mode —CBR/rt-VBR/nrt-VBR/UBR.Fr

www.modecom.eu56802.11n WLAN ADSL2+ RouterQoS Quality of Server, a characteristic of data transmission that measures how accurately and how quickly a

57802.11n WLAN ADSL2+ RouterField DescriptionADSL modula-tionChoose prefered xdsl standard protocols.G.lite : G.992.2 Annex AG.dmt : G.992.1 Annex AT1

www.modecom.eu58802.11n WLAN ADSL2+ RouterLocal Network CongurationThe Addressing page displays information about your LAN IP address and allows you

59802.11n WLAN ADSL2+ Router10.0.0.210.0.0.4 10.0.0.510.0.0.2Change setting successfully! Click OK button.From the left-hand LAN menu, click on LAN.Ty

www.modecom.eu6802.11n WLAN ADSL2+ RouterUsing this DocumentNotational conventionsAcronyms are dened the rst time they appear in the text

www.modecom.eu60802.11n WLAN ADSL2+ Routera. Select Run... from the Start menu. b. Enter winipcfg and click OK. c. Select your ethernet adaptor from t

61802.11n WLAN ADSL2+ RouterThe System is Restarting ...Adding the Secondary LAN IP address and subnet maskFrom the left-hand • LAN menu, click on LA

www.modecom.eu62802.11n WLAN ADSL2+ RouterFrom the left-hand • Adminmenu, click on Commit/Reboot. The following page is displayed:Commit/Rebootpage

63802.11n WLAN ADSL2+ RouterThere are two different DHCP roles that this device can act as: DHCP Serve and DHCP Relay. When acting as DHCP ser

www.modecom.eu64802.11n WLAN ADSL2+ RouterApply Changes Set new DHCP server conguration. New parameters will take effect after save into ash memory

65802.11n WLAN ADSL2+ RouterDHCP Relay CongurationFrom the left-hand • Services menu, click on DHCPSettings.From • Services check ratio, click on

www.modecom.eu66802.11n WLAN ADSL2+ RouterChange setting successfully! Click • OK button.You need to renew your DHCP lease:• Windows 95/98a. Select R

67802.11n WLAN ADSL2+ RouterThe System is Restarting ...• DHCP None CongurationFrom the left-hand • Services menu, click on DHCPSettings.From • Se

www.modecom.eu68802.11n WLAN ADSL2+ RouterYou need to renew your DHCP lease:• Windows 95/98a. Select Run... from the Start menu. b. Enter winipcfg and

69802.11n WLAN ADSL2+ RouterThe System is Restarting ...• DNS CongurationThere are two submenus for the DNS Conguration: DNS Server and Dynamic DNSD

7802.11n WLAN ADSL2+ RouterFront PanelThe front panel contains lights called Light Emitting Diodes (LEDs) that indicate the status of the unit.FrontP

www.modecom.eu70802.11n WLAN ADSL2+ RouterField DescriptionAttain DNS AutomaticallySelect this item if you want to use the DNS servers obtained by the

71802.11n WLAN ADSL2+ RouterDHCP Server Conguration - Set DNS ManuallyFrom the left-hand • Services menu, click on DNS->DNSServer.From check r

www.modecom.eu72802.11n WLAN ADSL2+ RouterFrom the left-hand • Adminmenu, click on Commit/Reboot. The following page is displayed:Commit/Rebootpage

73802.11n WLAN ADSL2+ Routerto register with some website and get a domain name. When the IP address of the host changes, it just needs to send a mess

www.modecom.eu74802.11n WLAN ADSL2+ RouterConguring IP InterfacesYou need to create a Dynamic DNS interface per IP interface and can only create one

75802.11n WLAN ADSL2+ RouterHostname Domain name to be registered with the DDNS server.Username User-name assigned by the DDNS service provider.Passwo

www.modecom.eu76802.11n WLAN ADSL2+ RouterEnter the • Hostname, Emailand Password.Click • Add button.Field DescriptionEnable Check this item to ena

77802.11n WLAN ADSL2+ RouterFrom the left-hand • Adminmenu, click on Commit/Reboot. The following page is displayed:Commit/RebootpageClick on • OK

www.modecom.eu78802.11n WLAN ADSL2+ RouterIP/Port FilteringFrom the left-hand • Services menu, click on Firewall->IP/PortFiltering.Fieldsonth

79802.11n WLAN ADSL2+ RouterDelete Selected Delete selected ltering rules from the lter table. You can click the checkbox at the Select column to se

www.modecom.eu8802.11n WLAN ADSL2+ RouterRear PanelThe rear panel contains a RestoreDefaults button, the ports for the unit’s data and power connecti

www.modecom.eu80802.11n WLAN ADSL2+ RouterIncoming Default Action Specify the default action on the WAN to LAN bridging/forwarding path.Function Butto

81802.11n WLAN ADSL2+ RouterPort ForwardingYour device has built in advanced Security features that protect your network by blocking unwanted trafc f

www.modecom.eu82802.11n WLAN ADSL2+ RouterApplicationTCP port numberUDP port numberTrigger re-quired?Internet Relay Chat (IRC)194194falseNetmeeting (h

83802.11n WLAN ADSL2+ RouterFrom the left-hand • Services menu, click on Port Forwarding. The following page is displayed:From the • PortFor

www.modecom.eu84802.11n WLAN ADSL2+ RouterFieldsontherstsetting blockDescriptionEnable Port Forwarding Check this item to enable the port-forward

85802.11n WLAN ADSL2+ RouterThe System is Restarting ...• Port Forwarding for HTTPIn this example conguration, a custom application called HTTPServe

www.modecom.eu86802.11n WLAN ADSL2+ RouterFrom the • PortForwarding check ratio, check on EnableClick • ApplyChanges Type the Local IP Address for

87802.11n WLAN ADSL2+ RouterCongure Port Forwarding setting successfully!• 10.0.0.33From the left-hand • Adminmenu, click on Commit/Reboot. The fol

www.modecom.eu88802.11n WLAN ADSL2+ RouterClick • DeleteSelected. The Port Forwarding setting has been deleted completely.From the left-hand • Admi

89802.11n WLAN ADSL2+ RouterURL BlockingThe URL Blocking is the web ltering solution. The rewall includes the ability to block access to specic web

9802.11n WLAN ADSL2+ RouterBottomSideforResetbuttonFigure1:Label FunctionLINE Connects the device to a telephone port in the wall of your home/o

www.modecom.eu90802.11n WLAN ADSL2+ RouterFunction Button DescriptionApply Changes Click to disable/enable the URL Blocking capabilityAdd FQDN Add FQD

91802.11n WLAN ADSL2+ RouterClick on • OK.Conguring URL Blocking of KeywordFrom the left-hand • Services menu, click on Firewall->URLBlocking

www.modecom.eu92802.11n WLAN ADSL2+ RouterFieldsontherstsetting blockDescriptionURL Blocking capability Check this item to enable the URL Blockin

93802.11n WLAN ADSL2+ RouterCongure URL Blocking of Keyword setting successfully!• From the left-hand • Adminmenu, click on Commit/Reboot. The foll

www.modecom.eu94802.11n WLAN ADSL2+ RouterFieldsontherstsettingblockDescriptionDomain Blocking capability Check this item to enable the Domain B

95802.11n WLAN ADSL2+ RouterFrom the left-hand • Adminmenu, click on Commit/Reboot. The following page is displayed:Click on • OK.DMZA demilitarize

www.modecom.eu96802.11n WLAN ADSL2+ RouterFieldsontherstsettingblockDescriptionEnable DMZ Check this item to enable the DMZ feature.DMZ Host IP

97802.11n WLAN ADSL2+ RouterUPnPUPnP is an architecture for pervasive peer-to-peer network connectivity of intel-ligent appliances, Wireless devices

www.modecom.eu98802.11n WLAN ADSL2+ RouterFieldsontherstsettingblockDescriptionUPnP Daemon Enable/disable UPnP feature.Binded WAN Interface Sele

99802.11n WLAN ADSL2+ RouterUPnP Control Point Software on Windows METo install the control point software on Windows ME: 1. In the Control Panel, sel